Driveshafts
Schmierfett für Gleichlaufgelenke MOS2-G6 80 Gramm
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251598201
mit Montageteilen,T2 T3 innen und aussen, nicht syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251501357
Unterlegplatte für Antriebswellenschraube passend für VW T3 Durchmesser 10 für Antriebswellenschraube Syncro 16 Zoll pro Gelenk 3 verbaut nur für Syncro 16 Zoll
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407195
Unterlagscheibe Mutter Traggelenk Antriebswelle vorne Unterlagscheibe im Achsschenkel unten Beilagscheibe für Achsmutter Antriebswelle vorne NUR SYNCRO
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0147513
Innensechskantschraube M8 x 50 passend für VW T3 Antriebswellengelenk Syncro vorn innen
Not available
VW reference number:443498201B
Manschette für Gleichlaufgelenk passend für VW T3 16 Zoll nur für T3 Syncro 16 Zoll für Gelenk mit 108 mm innen oder außen
Not available
VW reference number:251407295
Rear drive shaft spacer 108mm suitable for VW T3 Syncro 16 inch only for the 16 inch or 16 inch constant velocity joints with 108mm diameter Material: steel, galvanized Dimensions: 5 x 108mm
Not available
VW reference number:251598101
CV joint rear HD suitable for VW T3 Constant velocity joint WITHOUT assembly parts and sleeve inside or outside Syncro can also be used inside the front strengthened larger workspace Diameter 100mm Hole diameter mounting screws: 8 mm...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498201A
Axle boot for rear HD, inside/outside, suitable for VW T3 suitable for the Syncro/2WD 14" the cuff convinced us after a long test and we would now like to offer it to you it is ideal for higher buses with stronger articulation angles...
Ready to ship today,
Delivery time appr. 1-3 workdays
In Anlehnung an das "Schlechtwegepaket" von VW Fahrzeuge, die auch im Wald eingesetzt werden, erleiden oft Schäden an den vorderen Antriebswellen durch von Ästen zerstochene Gelenk-Manschetten. Um diese Manschetten zu schützen wurde von...
Not available
VW reference number:251407629
Sealing ring wheel bearing Syncro front. Compartible for VW T3. Seal with double lip for front wheel bearing 14/16 inch.
Not available
VW reference number:251498103A
Constant velocity joint front inside suitable for VW T3 Syncro front left or right Synchro 14 and 16 inches 33 teeth Diameter 100mm
Not available
VW reference number:251407271JX 251407271BX
Geeignet für: :Syncro 14/16 Zoll
drive shaft in exchange for the Syncro, front, compartible for VW T3 The outer joint has a diameter of 90 mm. This drive shaft can be used on both 14 "and 16" vehicles and diff lock vehicles. Plus old parts deposit 50, - € will...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407295
Geeignet für: :Syncro
spacer for the drive shaft on differential front for the Syncro, compartible for VW T3
Not available
VW reference number:251501203GX
Nach Zahreichen Reklamationen verkaufen wir derzeit keine hinteren Wellen der Marke SKF!!!! Wellen der Marke GKN findet ihr hier
Not available
VW reference number:251598101
Geeignet für: :VW T3 2WD / 14" Syncro
CV joint for drive shaft 2WD / 14 "Syncro. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498201A
Geeignet für: :VW T3 Syncro 14/16 Zoll
axle boot for front, inside . Suitable for the Syncro 14 " and 16" compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:443498201B
Geeignet für: :VW T3 Syncro 16 Zoll
axle boot for rear, inside / outside. Suitable for the Syncro 16 ", compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091517285
Geeignet für: :VW T3 2WD
drive shaft joint flange 14 "/ 2WD from own production, compartible for VW T3 The Flanch is made of better material like original. Surface to shaft seal was inductively hardened.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407271JX, 251407271
Geeignet für: :VW T3 Syncro 14/16 Zoll
drive shaft in exchange for the Syncro front 14/16 inch, compartible for VW T3 1 piece The outer joint has 90mm diameter. This PTO can be used on both 14 "and 16" vehicles and diff lock vehicles. Plus old parts deposit 50, - € will...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251598201
Geeignet für: :VW T3 2WD/Syncro 14"
axle boot for rear, inside / outside, compartible for VW T3 Suitable for the Syncro / 2WD 14 " 1 piece
Not available
VW reference number:251498203F
Geeignet für: :VW T3 Syncro 14/16 Zoll
axle boot with 90 cm diameter for front, outside. Suitable for the Syncro 14 "and 16" without difflock,Compartible for VW T3 1 piece
Not available
VW reference number:251501201G
Geeignet für: :VW T3 Syncro 16 Zoll
drive shaft in exchange for the Syncro 16 ", rear, compartible for VW T3 1 piece Plus old parts deposit 50, - € will automatically be added when placing an order.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N91108201
Geeignet für: :Syncro, 2WD
multi point screw for mounting motor shaft, compartible for VW T3
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:431498104C
constant velocity joint for the rear drive shaft 16 inch, 108 mm Syncro, compartible for VW T3
VW reference number:251501203GX
Geeignet für: :VW T3 2WD/Syncro 14Zoll
Drive shaft in exchange for the 2WD and Syncro 14 "rear, compartible for VW T3. Not suitable for automatic transmission. 1 piece Plus old parts deposit 50, - € will automatically be added when placing an order.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498203E
Geeignet für: :VW T3 Syncro 14/16 Zoll
axle cuff with 100 cm diameter for front, outside. Suitable only for the Syncro 16" with difflock, compartible for 1 piece
Not available
Adaptersatz zum Montieren der verstärkten 16" Syncro Antriebswelle. Größe ist 108mm, anstatt der org 14" (100mm), passend für VW T3. 1 Satz
Not available
VW reference number:431498103CX
constant velocity joint for the drive shaft 108 mm, suitable for the 16 inch Syncro, rear, compartible for VW T3 1 piece
Not available
VW reference number:N0153711
lock washer for fixing the motor shaft. Suitable for 2WD and syncro 14 inches, compartible for VW T3
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407328
Dichtring für Antriebswellenaußengelenk 90mm vorne außen ohne Befestigungsblech, passend für VW T3 für euren Syncro. 1 Stück
Not available
VW reference number:113301195
disc for transmission, compartible for VW T3
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094517285A
Geeignet für: :Syncro; 16 Zoll
drive shaft hinge flange Syncro 16 inch, compartible for VW T3 Suitable for the following models: T2 01/95 - 04/03 T3 Syncro 02/85 - 07/92 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498099E
Geeignet für: :Syncro
Gelenksatz für außen mit 90mm, 25 Zähne Innenverzahnung, geeignet für euren Syncro, passend für VW T3. 1 Satz Vorderachse
Not available