Stabilizer
VW reference number:251411063
Schelle Stabilisator vorne passend für VW T3 nur für 2WD nicht für Syncro bis Baujahr 85 für Stabilisatoren mit der gebogenen Stütze für Stabi
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411063A
Schelle für Stabilisator vorn passend für VW T3 nur für 2WD (nicht für Syncro) pro Fahrzeug sind 2 Stück verbaut ab Baujahr 85 für Stabilisatoren mit einer geraden Stütze für Stabi
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:411513121
Dampening ring rubber lower stabilizer support from 8/84 from chassis number 24-F-01968 not for sync 2 pieces per support
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411041B
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:171512337
2 WD ab 8/84 (Fgstnr: 24-F-019 682, gerade Stütze) NICHT für Syncro Pro Stütze werden 2 Stk. benötigt
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:411513121
Dämpfungsring Gummi Stabilisatorstütze unten ab 8/84 ab Fahrgestellnummer 24-F-01968 nicht für Syncro pro Stütze 2 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045A
bearing for the stabilizer outside with 23mm, compartible for VW T3 Syncro / 2WD
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045B
bearing for the stabilizer outside 19 mm compartible for VW T3 2WD / Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411025C
stabilizer 19mm compartible for VW T3 Stabilizer for the front axle of the rear-wheel drive T3. From chassis number 24 G 118 222
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411047
Distanzhülse für Dämpfungsring Stabilisatorstütze für alle VW T3 Modelle auch für Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411039
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045B
This PU bearing bushing Stabilizer eye 19mm is brand quality made by Powerflex. Compartible for VW T3. Please note that one bearing bush is included in the scope of delivery (two bearing bushes are required).
VW reference number:251411049F
Geeignet für: :VW T3 Syncro 14 Zoll
Support for stabilizer up to 88 suitable for VW T3 Syncro for Syncro 14 and 16 inches with sheet metal handlebars at the front
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411041C
Geeignet für: :VW T3
Rubber mount for stabilizer with 21mm size. Compartible for VW T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411049K
Geeignet für: :VW T3 Syncro 14/16 Zoll
Stabilizer support from 88 right suitable for VW T3 Syncro for 14 and 16 inch buses for vehicles with cast wishbones
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :VW T3 2WD
stabilizer, bottom complete, suitable for 2WD (from year of construction 86). Consisting of: 2x rubber bearings, 1x sleeve, 2x discs and 1x self-locking nut.
Not available
Geeignet für: :2WD, Syncro 14 Zoll und 16 Zoll
stabilization, below complete, for the 2WD (until Construction year 85). 2 rubber bearings 1 sleeve 1 slice 1 nut self-locking
Not available
VW reference number:411513121
Geeignet für: :VW T3
This bearing bush (down) is proven quality by Powerflex. Compartible for VW T3. Please note scope of delivery includes one piece bearing bush (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045
Geeignet für: :VW T3
This bearing bush is proven quality by Powerflex. Compartible for VW T3. Please note scope of delivery includes one piece bearing bush (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411041C
Geeignet für: :VW T3
This bearing bush stabilisator 21mm is proven quality by Powerflex. Sompartible for VW T3. Please note scope of delivery includes one piece bearing bush (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045
Geeignet für: :VW T3
Rubber bearing for rod support eye 21mm. Compartible for VW T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411051
Geeignet für: :VW T3 2WD
Rod support up to year 85 suitable for the 2WD.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411051A
Support for stabilizer straight from 8/84 suitable for VW T3 not for Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411085
Geeignet für: :Syncro
Lagerbock für Stabilisator Syncro. Passend für VW T3. 1 Stück Material Aluminium EN AW 5083
Ready to ship today,
Delivery time appr. 1-3 workdays
This PU bearing bushing stabilizer eye 23 mm is brand quality made by Powerflex. Compartible for VW T3. Please note that one bearing bush is included in the scope of delivery (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411049J
Support for stabilizer from 88 left suitable for VW T3 Syncro for vehicles with cast wishbones for 14/16 inch buses
Ready to ship today,
Delivery time appr. 1-3 workdays