VW reference number:094409181C
Geeignet für: :VW T3
speedometer sprocket in black with 20 teeth, compartible for VW T3 This pinion is a replica. The material is identical to the VW org part. All of our sprockets are black / gray for production purposes, but corresponding to the...
Not available
VW reference number:094311431
Nadellager für den Rückwärtsgang, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:002311125A
Geeignet für: :VW T3
It's a needle bearing for your gearbox / drive shaft. -1 piece
Not available
VW reference number:091311373C
Geeignet für: :VW T3
This is a needle bearing at the end shield.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:014311317
Circlip for your T3 gearbox, suitable for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:333000176
shaft bushing clutch bell / guide bushing for the transmission input shaft, compartible for VW T3 1mm larger in outer diameter than original, from our own production
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311187B
Circlip for your T3 gearbox, suitable for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :VW T3 2 WD
Drive set 29: 7 the 2WD, 5-speed gearbox. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711551
Geeignet für: :VW T3
universal joint for selector rod in very good quality, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:171711166
Geeignet für: :VW T3
bearing bushing lever for front lower, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311105A
Geeignet für: :VW T3 Diesel / Turbodiesel
Coupling mandrel / transmission input shaft for D / TD. Suitable for your VW Bus T3. Original VW. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311313
Sperrstück als Teil von eurem T3 Getriebe, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:02A311265D
Nadelkäfig als Teil für euer T3 Getriebe, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :VW T3 WBX
Shaft ring set WBX crankshaft (clutch side) suitable for your VW Bus T3. Consisting of: Simmering, felt seal and O-ring.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:029198141A
Geeignet für: :VW T3 WBX, (MV DJ DG SS)
This clutch set from Sachs is suitable for all VW T3 water boxers (MV DJ DG SS). - 228 mm, incl. Automat, disc, release bearing
Not available
VW reference number:094311380A
Nadellager Antriebswelle zuschaltbarer Allrad passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:113141711A
Lagerbuchse aus Messing, für Schaltwelle in Kupplungsglocke, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091301131
Geeignet für: :VW T3
Seal ring for clutch bell, for your VW Bus T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311105
Geeignet für: :VW T3 WBX
Coupling mandrel / transmission input shaft for the WBX. Original VW. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:333000176
Geeignet für: :VW T3
shaft bushing for clutch bell or guide bush for transmission input shaft, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251501203GX
Geeignet für: :VW T3 2WD/Syncro 14Zoll
Drive shaft in exchange for the 2WD and Syncro 14 "rear, compartible for VW T3. Not suitable for automatic transmission. 1 piece Plus old parts deposit 50, - € will automatically be added when placing an order.
Not available
VW reference number:251407271J, 251407271B
Geeignet für: :VW T3 Syncro 14/16 Zoll
drive shaft in exchange for the Syncro front 14/16 inch, compartible for VW T3 1 piece The outer joint has 90mm diameter. This PTO can be used on both 14 "and 16" vehicles and diff lock vehicles. Plus old parts deposit 50, - € will...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N90262101
O-Ring für Sperrenbetätigung, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:020301129B, 020301132
Verschlußkappe für Kupplungsglocke, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
Shift travel reduction for the VW Bus T3 VW Bus T3 built between 1980 and 1992 optionally, depending on the year of manufacture, use the sleeve with a diameter of 12 or 14 mm for the shift lever Shift travel reduction by approx. 25%...
Not available
VW reference number:251498203E
Geeignet für: :VW T3 Syncro 14/16 Zoll
axle cuff with 100 cm diameter for front, outside. Suitable only for the Syncro 16" with difflock, compartible for 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311523
Nadelkäfig als Teil für das T3 Getriebe, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311321A
Sicherungsring als Teil für euer T3 Getriebe, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311110A
retaining washer deep groove ball bearing, compartible for VW T3 Suitable for the following models: Transporter T2 (08/67 - 07/79) Transporter T3 (05/79 - 07/85) Transporter T3 Syncro (02/85 - 07/92) Type 2 Mex (08/71 - 05/01) 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:113311387
Sicherungsring 2,30, als Teil für euer Getriebe, passend für VW T3 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711167E
Geeignet für: :VW T3
bellows for gearshift ball on the gearbox, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251721263A
Geeignet für: :Diesel/Turbodiesel, WBX
Clutch slave cylinder diesel/turbodiesel and water boxer, suitable for VW T3 1 piece
Not available
VW reference number:431498103CX
constant velocity joint for the drive shaft 108 mm, suitable for the 16 inch Syncro, rear, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:088141165A
Geeignet für: :VW T3
This is a release bearing of the Sachs brand.
Not available
VW reference number:251598201
Geeignet für: :VW T3 2WD/Syncro 14"
axle boot for rear, inside / outside, compartible for VW T3 Suitable for the Syncro / 2WD 14 " 1 piece
Not available
VW reference number:251521101D
Zuzüglich Altteilepfand 450,- € wird bei Bestellung automatisch hinzugefügt! Nach Rücksendung des Altteils wird dieser zurückerstattet! Das Altteil muss instandsetzbar sein! Eine Hardischeibe muss verbaut sein! Unsere Erfahrung hat...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094311375
Geeignet für: :VW T3
needle roller bearings for the gearbox, compartible for VW T3 1 piece
Not available
VW reference number:253711120
Geeignet für: :VW T3
Plastic frame for gear lever cover for your VW Bus T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094517143E
Geeignet für: :VW T3 2WD
Drive unit 32: 7 for the 2WD, 5-speed gearbox. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094409435X
Geeignet für: :VW T3
Viscous coupling in exchange, from org. Manufactured Plus € 350, - old parts deposit! This is automatically added to an order. This will of course be credited back to you when returning the old part if the visco is repairable again....
Not available
Geeignet für: :VW T3 1,9 l TDI
Reinforced special clutch including flywheel and screws for 1.9 liter TDI conversions in the VW Bus T3. We only use this clutch set for our own TDI conversions. Replaces the dual mass flywheel, less engine vibrations, protects the...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498099E
Geeignet für: :Syncro
Gelenksatz für außen mit 90mm, 25 Zähne Innenverzahnung, geeignet für euren Syncro, passend für VW T3.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094311217
reverse gear 2WD, compartible for VW T3 Suitable for the following models: Transporter T3 (05/79 - 07/85) Transporter T3 (08/85 - 07/87) Transporter T3 (08/87 - 07/92)
Ready to ship today,
Delivery time appr. 1-3 workdays
Transmission suspension bearing made of PU for Syncro 2 sets are required for the transmission suspension. For the front axle differential suspension, please refer to the org. Use rubber bearing Art.Nr .: G 0031 !. Ask? Call or email
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251501201G
Geeignet für: :VW T3 Syncro 16 Zoll
drive shaft in exchange for the Syncro 16 ", rear, compartible for VW T3 1 piece Plus old parts deposit 50, - € will automatically be added when placing an order.
Not available
VW reference number:091301215A
Geeignet für: :VW T3 2WD
seal for rear end plate, for 2WD, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094311217B
Geeignet für: :VW T3 Syncro
reverse gear for the Syncro, 28 teeth, compartible for VW T3
Ready to ship today,
Delivery time appr. 1-3 workdays