VW reference number:211501357
Unterlegplatte für Antriebswellenschraube passend für VW T3 pro Antirebswelle sind 3 Stück verbaut hinten alle 2WD und Syncro 14 Zoll vorn innen alle 14 und 16 Zoll Syncro
Not available
VW reference number:443498201B 251598201A
Manschette für Gleichlaufgelenk passend für VW T3 16 Zoll nur für T3 Syncro 16 Zoll für Gelenk mit 108 mm hinten innen oder außen
Not available
VW reference number:251711291
Bolt for the universal joint of the shift rod 2 installed per vehicle usable from 83 all types 4 speed 5 speed SYNCO
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711199
Fitting screw for connecting shift lever to shift rod 4th gear from 83 5 - gear Synco
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N90089901
Sealing ring universal joint circuit 8x25 4 pieces per universal joint circuit
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711244B
Compression spring on the underside of the shift lever. This activates the reverse gear locking mechanism
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:001311394
Adjusting disk 0.4 suitable for VW T3 0.4mm
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711815A
Holder protective tube shift rod suitable for VW T3 Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
Repair kit shift rod guide from 07/87 consisting of Rear shift rod bush Front shift rod bush Shift lever on the gearbox Rear shift rod bellows Bellows shift ball on the gearbox
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711192
Flange for mounting the shift rod bearing at the front only for synco Flange on the front shift rod bearing in the cross member in the direction of the front axle gearbox
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407295
Rear drive shaft spacer 108mm suitable for VW T3 Syncro 16 inch only for the 16 inch or 16 inch constant velocity joints with 108mm diameter Material: steel, galvanized Dimensions: 5 x 108mm
Not available
VW reference number:251711130
Support plate for switch housing VW T3, not for automatic
Not available
VW reference number:1J0711603
Clamp flange shift rod suitable for VW T3 Clamp for the separation point in the middle of the shift rod on the teeth
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094409410
Cover front axle differential suitable for VW T3 Syncro new original Volkswagen spare part limited availability Front differential cover on all T3 Syncro models
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711866
Latch for lock operation Lock can only be engaged by twisting and pulling lock front switchable all-wheel drive
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251598101
CV joint rear HD suitable for VW T3 Constant velocity joint WITHOUT assembly parts and sleeve inside or outside Syncro can also be used inside the front strengthened larger workspace Diameter 100mm Hole diameter mounting screws: 8 mm...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711919 251711894 251711815A
Complete set of protective tubes with holder for the shifter on the VW T3 Syncro original VW spare part 3-piece set consisting of the protective tube for the shift rod behind the cross member, the short protective tube behind the cross...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N90009201
Screw safety cap drive shaft flange on the gearbox suitable for VW T3 M7x1.25x13 to be used for the rear as well as for the Syncro for the front gear
Not available
VW reference number:02D5825641A
Grommet for vacuum actuator differential lock suitable for VW T3 T4 Made in Germany high-quality reproduction suitable for the actuator on the T3 and T4
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311145H 091311351E
Gear wheel pair 0.85 5th gear for 2WD 4th gear for Syncro high-quality post-production
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094311153C 094311361B
Gear pair 0.82 5th gear for 2WD 4th gear for Syncro high-quality reproduction Number of teeth 40/49 for 5th gear with 2WD or 4th gear with Syncro installed as standard in the 3H, AAP, AAS
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711167A
Bellows for the rear shift rod ONLY shift linkage up to 12/82 1 piece installed per vehicle
Not available
VW reference number:N90010002
Spannstift 6x18 passend für VW T3 Schwungrad WBX 3 Stück pro Schwungrad
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251721461A
Front line between master cylinder and center clutch line Connection to the encoder with a hollow screw replaces the transparent line
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0122345
Federscheibe B7x14x0,8 passend für VW T3 für Schraube der Sicherungskappe am Getriebe über der Abdeckscheibe
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0124362
Rear shift rod lock washer 251711155M and 251711575B One security certificate is required for each shift rod
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711198D 251711198C
Half shell to accommodate the shift rod bearing suitable for VW T3 suitable for: Shift rod from 82 for front bearings from 08/82 and rear 07/92 4 pieces installed per vehicle (2 pieces per bearing)
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094311578G
Shift rod for differential lock suitable for VW T3 Made in Germany from BJ: 86
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094301213B
Bearing bush shift rod guide for lock actuation suitable for VW T3 aluminum anodized Delivery without O-rings Made in Germany
Ready to ship today,
Delivery time appr. 1-3 workdays
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0105003
VW Bus T3 Syncro Hexagon head screw for fastening Syncro rear axle differential Hexagon head screw with shank DIN 931 Thread: standard thread Strength 10.9 galvanized Diameter : M10 Length: 110mm
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0232593
Spring pin differential lock shift rod suitable for VW T3 for shift rod for shift rod in the front differential for auxiliary drive Dimensions 3x8
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091311507A
Reverse wheel -reverse gear- suitable for T3 with 4 or 5 speed manual transmission
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:091301141A
Magnetic oil drain plug M 24 x 1.5
Not available
VW reference number:111301127F 012301127F
Magnetic oil drain plug M 24 x 1.5
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498201A
Axle boot for rear HD, inside/outside, suitable for VW T3 suitable for the Syncro/2WD 14" the cuff convinced us after a long test and we would now like to offer it to you it is ideal for higher buses with stronger articulation angles...
Not available
VW reference number:N0133171
Spring pin sleeve speedometer drive pinion suitable for VW T3 Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711575B
Connection at the universal joint front shift rod - rear shift rod
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:357820609
Grommet vacuum tank differential lock suitable for the T3 and the T4
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251399241P
Bearing block for 4-speed manual transmission Suitable for 4-speed manual diesel and turbo diesel original VW spare part Limited quantities available
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711273C
Shift rod in front for all 5 speed models only for 5 speed transmission only for 2WD
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094409021A
New front axle differential suitable for the VW T3 Syncro Identification letter 6N Translation 38:7 / 5.43 with new viscous coupling only for 14 inch Syncro buses original VW spare part NOS, limited stock available one of the last...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251721491A
Bracket for clutch pressure pipe T3 Diesel VW Transporter T3 80-92 Bracket for clutch pressure pipe
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251711184C
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251721359
Tension strut between clutch cylinder and gearbox. Gasoline ONLY galvanized with mounting material
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0203501
Hose between reservoir and master cylinder Brake Fluid Resistant Inner diameter 7mm Outer diameter 13 mm Test pressure 30 bar Hose between brake fluid reservoir and clutch master cylinder, requires approx. 700 mm
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:094409021T
New front axle drive for the Syncro T3. Transmission code ALM Translation 35/6 Drive wheel for speedometer: Z=7 only for 14 inch buses original VW spare part quality one of the last available front differentials with viscous coupling
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251399201L
Transmission mount in front manual transmission Diesel, suitable for VW T3 rubber-metal bearings Suitable for all diesel and turbo diesel not for automatic
Not available