Front Axle
VW reference number:251411049F
Geeignet für: :VW T3 Syncro 14 Zoll
Support for stabilizer up to 88 suitable for VW T3 Syncro for Syncro 14 and 16 inches with sheet metal handlebars at the front
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498625
Geeignet für: :VW T3
Radlagersatz vorne kompatibel von 79 bis 8/83. Passend für VW T3. 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251498625A
Radlagersatz für vorne geeignet ab Baujahr 08/83 passend für VW T3 2WD. 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407187
Geeignet für: :VW T3 2WD/Syncro 14/16 Zoll
Ball joint / lower link, suitable for 2WD, Syncro 14/16 inch. Compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411041C
Geeignet für: :VW T3
Rubber mount for stabilizer with 21mm size. Compartible for VW T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407097
Spacer sleeve for the tension strut on the wishbone front axle. Suitable for the Syncro / 2WD 14/16 inch construction: T3 bus / bunk 1979-1992 T3 Syncro 1984-1992 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407691A
Geeignet für: :VW T3 2WD
hub cap for 2WD, with 4 square hole for speedometer cable, for right and left usable, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :Syncro
Anbausatz für Oberlenker/Querlenker, geeignet für Syncro. Passend für VW T3. 2x Gummilager Oberlenker Lemmförder 2x Scheiben 5 mm 1x Zylinderschraube Querlenker oben 12x1,5x105 1x U-Scheibe 1x Mutter selbstsichernd
Ready to ship today,
Delivery time appr. 1-3 workdays
tension rod bearing consisting of, compartible for VW T3 1 mother 1 nut self-locking 2 slices 1 sleeve 1 rubber mount inside 1 rubber bearing outside
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0447273
Imbusschraube für das Traggelenk oben. Passend für VW T3. 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
Screw set for fixing the lower link inside. Compartible for VW T3. Set consisting of: 1x screw, 1x nut, 1x spring washer
Not available
VW reference number:251498002
Geeignet für: :VW T3
Wheel bearing kit front compatible by the manufacturer FAG, for your VW T3 Syncro 14/16 inch. Wheel bearings 2 x shaft seal circlip axle nut
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407077
Geeignet für: :VW T3
rubber bearing upper link. Outside Ø 41mm Inside Ø 14 mm Unfortunately, Lemförder has quality issues with this article. For this reason, we currently use only the PU bushings for the top link. All other Lemförder parts are of very good...
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407187
Geeignet für: :VW T3 2WD/Syncro 14/16 Zoll
Ball joint / guide joint suitable for lower link, 2WD, Syncro 14/16 inch. For the front axle. 1 piece
Not available
VW reference number:251407059A
Geeignet für: :2WD ab 85
Zugstrebe vab 08/84 2WD passend für VW T3 rechts oder links passend alle ab 84 nicht für Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411049K
Geeignet für: :VW T3 Syncro 14/16 Zoll
Stabilizer support from 88 right suitable for VW T3 Syncro for 14 and 16 inch buses for vehicles with cast wishbones
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :VW T3 2WD
stabilizer, bottom complete, suitable for 2WD (from year of construction 86). Consisting of: 2x rubber bearings, 1x sleeve, 2x discs and 1x self-locking nut.
Not available
VW reference number:251498625A
Geeignet für: :VW T3
Wheel Bearing Kit 2 WD front compatible from 08/83 from manufacturer SKF. Compartible for VW T3. 1 piece Manufacturer SKF / F
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :2WD, Syncro 14 Zoll und 16 Zoll
stabilization, below complete, for the 2WD (until Construction year 85). 2 rubber bearings 1 sleeve 1 slice 1 nut self-locking
Not available
VW reference number:411513121
Geeignet für: :VW T3
This bearing bush (down) is proven quality by Powerflex. Compartible for VW T3. Please note scope of delivery includes one piece bearing bush (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045
Geeignet für: :VW T3
This bearing bush is proven quality by Powerflex. Compartible for VW T3. Please note scope of delivery includes one piece bearing bush (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411041C
Geeignet für: :VW T3
This bearing bush stabilisator 21mm is proven quality by Powerflex. Sompartible for VW T3. Please note scope of delivery includes one piece bearing bush (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
PU bearing bushing set for tension strut, picture 7, for 1 side, manufacturer: org. Powerflex 2 sets are always required for a conversion
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407691A
Geeignet für: :VW T3 2WD
hub cap for 2WD, with 4 square hole for speedometer cable, for right and left usable, compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407175
Geeignet für: :VW T3 2WD/Syncro 14/16 Zoll
Rubber bearing tension strut suitable for the 2WD / Syncro 14/16 inch, inside for the front axle. Compartible for VW T3 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407186
Geeignet für: :VW T3
VW T3 adapter sleeve for steering joint of the lower link. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407361
Geeignet für: :2WD, Syncro
Ball joint for above. Suitable for 2WD, Syncro 14/16 inch. Compartible for VW T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411045
Geeignet für: :VW T3
Rubber bearing for rod support eye 21mm. Compartible for VW T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407053A
Geeignet für: :VW T3
Cylinder head screw for mounting the top link. Compartible for VW T3. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411051
Geeignet für: :VW T3 2WD
Rod support up to year 85 suitable for the 2WD.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411051A
Support for stabilizer straight from 8/84 suitable for VW T3 not for Syncro
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407179
Geeignet für: :VW T3 2WD/Syncro 14/16 Zoll
VW T3 rubber bearing tension strut suitable for the 2WD / Syncro 14/16 inch, outside for the front axle. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407069
Geeignet für: :VW T3
Disc tension strut suitable for your VW Bus T3
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411085
Geeignet für: :Syncro
Lagerbock für Stabilisator Syncro. Passend für VW T3. 1 Stück Material Aluminium EN AW 5083
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :Syncro
PU bushing kit for the tension strut Syncro compartible for VW T3 There are always 2 sets needed for the retooling.
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251407671
Verstemmutter für das Radlager vorne, 2WD. Passend für VW T3. 1 Stück
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:N0424561
VW T3 snap ring for the bottom hinge. 1 piece
Ready to ship today,
Delivery time appr. 1-3 workdays
This PU bearing bushing stabilizer eye 23 mm is brand quality made by Powerflex. Compartible for VW T3. Please note that one bearing bush is included in the scope of delivery (two bearing bushes are required).
Ready to ship today,
Delivery time appr. 1-3 workdays
VW reference number:251411049J
Support for stabilizer from 88 left suitable for VW T3 Syncro for vehicles with cast wishbones for 14/16 inch buses
Ready to ship today,
Delivery time appr. 1-3 workdays
Geeignet für: :2WD
Anbausatz für Oberlenker/Querlenker, geeignet für 2WD. Passend für VW T3. 2x Gummilager Oberlenker Marke: Lemmförder 2x Scheiben (Zubehör) 1x Zylinderschraube Querlenker oben 12x1,5x105 1x U-Scheibe 1x Mutter selbstsichernd
Ready to ship today,
Delivery time appr. 1-3 workdays